Home  |About Us | Product Information | Dealership | Contact Us |  Feedback |

 
Flux cored stainless wires are designed primarily for high deposition rate fillets in the flat and horizontal position. The wire produces minimal spatter with thin, easy to remove slag coverage. The deposit exhibits smooth x-ray quality welds with uniform ripples.

 

Chemicals and Physical Properties

AWS Classification C Mn Si Cr Ni Mo Tensile Strength (KSI) Elongation (%) Description
E308LT0-1 E308LT0-4 0.03 1.3 0.6 20.0 10.0   77 45 Used to join 304L base metals
E309LT0-1 E309LT0-4 0.03 1.2 0.7 23.5 12.6   78 39 Used to join 304 to mild steels or clad mild steel
E316LT0-4 0.03 1.1 0.7 18.6 12.2 2.6 76 46 Used to join 316L base metals

 

 

Welding Parameters

Size Shielding Gas Current (A) Voltage (V) Dep. Rate (lbs/hr)
.035" CO2 115-135 29-31 3.5-5.0
.035" 75%Ar- 25%CO2 115-135 27-29 3.5-5.0
.045" CO2 175-205 30-32 6.5-8.0
.045" 75%Ar- 25%CO2 175-205 28-30 6.5-8.0
1/16" CO2 215-250 30-32 8.0-9.0
1/16" 75%Ar- 25%CO2 215-250 28-30 8.0-9.0

A gas flow rate of 30CFH and wire extension of 1/2" to 1" is recommended. Wires are designed to run on Direct Current, Electrode Positive.

Designed & Hosted by : MID   Promoted by : GID